Asphalt Paving
We shall place type 6 or type 7 asphalt by using state of
the art paving equipment. By constructing a paving course to
a thickness of 1 ½”- 2” depending upon conditions set forth.
Compaction shall be completed by using vibratory rollers weighing
between 5-10 tons. Rolling and compacting shall continue until
all areas are sealed and free of lines.
Asphalt Reclamation
A pavement rehabilitation in which the full flexible pavement
section and a predetermined portion of the underlying materials
are uniformly crushed, pulverized and blended. Once the pavement
has been reclaimed, a series of grading and compacting takes
place. By using road graders and vibratory rollers we shape
and compact all areas to meet required compaction. Asphalt
Resurfacing
We shall place type 7 asphalt by using state of the art paving
equipment. By constructing a paving course to a thickness of
1 ½”-2” depending upon conditions set forth. Compaction shall
be completed by using vibratory rollers weighing between 5-10
tons. Rolling and compacting shall continue until all areas
are sealed and free of lines. Milling
Shaping and removal of portions of existing pavement surfaces
by a cold milling process. Manhole Installation
All existing castings will be removed and reset to required
grade. All areas must be clean and
free of all debris and road-paving materials. Manhole
frames will be set in Portland cement mortar. Covers must be
accurately set to finished grade.
Back to Services |
